E
Fotocamera digitale
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield of 99.99%. This means that some very small number of pixels
may not light or may remain lit at all times. This is due to the characteristics of the
liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
3
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using this Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Camera Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Camera Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Navigation Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Camera Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Attach the Camera Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning the Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LCD Monitor Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the LCD Monitor Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Taking Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting the Zoom Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting the Focus Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the Function Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Record Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Viewing in Single Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Viewing Thumbnails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Zooming Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Playing Videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Deleting an Image/Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Playback Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Contents
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
4
Setting Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Setting Power Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting LCD Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting Date & Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting Lingua. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting File Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting TV Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting Memory Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Connecting the Camera to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
About Folder and File Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Contents
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
5
Using this Menu
Symbols used in this manual are explained below.
NOTE
• This indicates useful information when using your camera.
IMPORTANT!
• This indicates important message that should be read before using the function.
System Requirements
In order to get the most out of your camera, your computer must meet the following
system requirements.
For Windows:
• Windows XP, Windows Vista, Windows 7
• Processor: Pentium II 450MHz or above
• Memory: 512MB or above
• HDD space: 200MB or above
• 16bit color display monitor
• Microsoft DirectX 9.0C
• USB port and CD-ROM drive
For Macintosh:
• Power Mac G3 or later
• Mac OS 10.3.X (X=0-9) - 10.6.4 or later
• Memory: 512MB or above
• QuickTime player ver. 6.0.3 or above
• USB port and CD-ROM drive
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
B
6
Camera Views
Front View
Flash
1
2
Self-timer LED/
AF Assist Lamp
Lens
1
3
4
2
3
Microphone
4
Back View
LCD monitor
Zoom button
Menu button
FUNC/Delete button
LED indicator
OK button/4-way navigation
control (8, 2, 4, 6)
Mode Switch
5
6
7
8
9
bk
6
7
8
9
bk
5
bl
r
Photo mode
Movie mode
Playback mode
bl
p
Top View
POWER button
Shutter button
bm
bn
bm
bn
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
7
Bottom View
Battery/Memory card
compartment
USB port
Tripod screw hole
Speaker
bo
bp
bq br
bp
bq
br
bo
Left/Right View
Strap ring
bs
bs
Camera Buttons
Your camera is equipped with different buttons for ease of use.
Button
POWER
Shutter
Description
Press the POWER button to turn the power on/off.
Press to capture an image or start/stop recording video clip.
In Photo and Movie mode, press the zoom button to left to zoom
out, right to zoom in. In Playback mode, press to zoom in to
magnify image or zoom out enter 9-image/calendar thumbnails.
Zoom
Menu
Press to enter or exit menu/submenu.
In Photo and Movie mode, press to enter function menu.
In Playback mode, press to delete an image or video clip.
FUNC/Delete
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
8
Navigation Control
The 4-way Navigation Control and the OK button allow you to access the various
menus available from the On Screen Display (OSD). You can configure a wide range
of settings to ensure maximum results from your images and videos. Further
functions of these buttons are as follows.
1
2
4
5
3
No.
Description
Face Tracking/Rotate
1
2
3
4
5
Macro
Display
Flash
OK
Button
Description
1)Confirm a selection when using the OSD menus.
2)In Playback Movie mode, press to start video playback.
OK
1)In Photo mode, press to scroll through the Flash mode options
(Auto, Red-eye Reduction, Forced On, Slow Sync and Forced
Off).
Flash/Right
Macro/Left
2)In Playback mode, press to view the next image or video clip.
3)In Playback movie mode, press to Forward video playback.
4)In Menu, press to enter the submenu or to navigate through the
menu selections.
1)In Photo mode, press to scroll through Macro options (Macro,
Pan Focus, Infinity and normal).
2)In Playback mode, press to view the previous clip.
3)In Playback movie mode, press to Rewind video playback.
4)In Menu, press to exit a submenu or to navigate through the
menu selections.
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
9
Button
Description
1)In Photo mode, press to turn the face tracking function on and
off.
2)Playing Video file, press to Pause/Start video playback.
3)In Playback photo mode, press to rotate the image right 90
degrees by each press of the button. This feature is applicable
for still images only.
Up/Face Tracking/
Rotate
4)In Menu, press to navigate through the menu and submenu
selections.
1)The LCD monitor can be changed into 5 different types such as
Basic, Full, None, Guideline and Help screen.
2)Playing Video file, press to stop video playback.
3)In Menu, press to navigate through the menu and submenu
selections.
Display/Down
Camera Memory
Internal memory
Your camera is equipped with 10.9MB of internal memory. If there is no memory card
inserted in the memory card slot, all image and video clips recorded are automatically
stored in the internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards
with a maximum capacity of 32GB and SDXC cards with a maximum capacity of
64GB. If there is a storage card inserted in the memory card slot, the camera
automatically saves all image and video clips in the external storage card. The icon
indicates the camera is using memory card.
IMPORTANT!
• Not all cards may be compatible with your camera. When purchasing a card,
please check the card’s specifications and take the camera with you.
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
10
Getting Started
Attach the Camera Strap
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
Inserting the Battery
1. Make sure the power is off before inserting the
battery.
2. Unlock and open the battery/memory card
compartment at the bottom of the camera.
3. Insert the battery into the compartment with the
terminal facing inside the camera with correct
orientation as shown.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
11
4. Close and lock the battery/memory card
compartment.
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
1. Turn off the camera.
Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER
button to turn off the camera.
2. After connecting the
USB cable
(included with camera)
supplied USB cable to
the USB-AC adaptor,
plug the adaptor into a
household power
outlet.
USB
USB port
Power cord
USB-AC adaptor
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
12
3. Connect the USB
cable to the camera.
The LED indicator
should flash green,
indicating that charging
has started.
USB-AC adaptor
The LED indicator will
go out when charging is
complete.
USB port
It takes about
150 minutes to achieve
a full charge. Charging
may take longer
depending on charging
conditions.
Small
connector
USB cable
(included with camera)
Making sure that the mark on the USB cable connector
is towards the lens side, connect the cable to the camera.
LED indicator Operation
LED indicator
Indicator Status
Flashing green
Flashing green, fast
Off
Description
Charging
Charging problem (page 78)
Charging complete
4. After charging is complete, disconnect the USB cable from the camera and
then unplug the adaptor from the power outlet.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
13
. To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the
camera’s battery over a USB connection. If this happens, use of the USB-AC
adaptor that comes with the camera is recommended.
1. Turn off the camera.
Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER
button to turn off the camera.
IMPORTANT!
• If you connect the camera to a computer for the first time after you purchase it
while the camera is turned on, the computer will enter a camera recognition
recognizes the camera, turn off the camera.
2. With your computer turned
USB cable
(included with camera)
USB port
on, connect the camera to
it.
The LED indicator should
flash green, indicating that
charging has started.
The LED indicator will go
out when charging is
complete.
It takes about 150 minutes
to achieve a full charge.
Charging may take longer
depending on charging
conditions.
Large connector
USB port
Small connector
Making sure that the mark on the USB cable
connector is towards the lens side, connect the
cable to the camera.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
14
LED indicator Operation
LED indicator
Indicator Status
Flashing green
Flashing green, fast
Off
Description
Charging
Charging problem (page 78)
Charging complete
3. After charging is complete, disconnect the USB cable from the camera and
then from the computer.
NOTE
• Even if you turn on the camera, the battery will continue to charge if there is a USB
connection with a computer. In this case, however, LED indicator operation will
change as described below.
LED indicator Operation
Indicator Status
Flashing green
Flashing green, fast
Lit green
Description
Charging
Charging problem (page 78)
Charging complete
IMPORTANT!
• Charging is not possible if the computer is in a rest or standby state.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the LED indicator flashing green
at high speed.
• Leaving the camera for about 14 hours with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
63).
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
15
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-80) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by using an SD, SDHC or SDXC
memory card.
1. Unlock and open the battery/memory card
compartment at the bottom of the camera.
2. Insert the SD/SDHC/SDXC card into the memory
card slot with the metallic part facing the front
(lens) side of the camera.
3. Push the SD/SDHC/SDXC card into the memory
card slot until it clicks into place.
4. Close and lock the battery/memory card
compartment.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
16
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
NOTE
• Windows XP does not support SDXC cards (exFAT format). However, with
Windows XP (Service Pack 2 or 3), you can download an exFAT patch update to
enable support for SDXC cards.
Turning the Power On and Off
Press the POWER button to turn the camera on or off. There are two ways to turn on
the camera.
• The startup image displays briefly and the startup sound plays if enabled. The
zoom lens extends and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the POWER button.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial
settings of your camera. First is the setup of language menu. Specify in which
language menus and messages are to be displayed on the LCD monitor.
Setting the Lingua
1. Press the 8, 2, 4 or 6 keys to move through the languages.
2. Select a language, and then press the OK button to apply.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
B
17
Setting the Date & Time
1. Press the 4 or 6 keys to move through the selection.
2. Press the 8 or 2 keys to change the value for the date and time.
3. Press the OK button to apply.
4. If necessary, press the Menu button to close the menu.
Now, you are ready to start taking images and videos.
NOTE
• Holding down the 8 or 2 keys changes the values continuously.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Modes
Your camera has three modes.
Photo mode
• Slide the Mode switch to [r] to capture images.
Movie mode
• Slide the Mode switch to [
] to record videos.
Playback mode
• Slide the Mode switch to [p] to view and edit captured images or playback
videos.
Scarica from Www.Somanuals.com. All Manuals Search And DownloGaedt.ting Started
18
Using the LCD monitor
The LCD monitor shows all important information regarding camera settings as well
as the visual image of your image or video. The display on the LCD monitor is called
the On Screen Display or OSD.
LCD Monitor Layout
. Photo Mode Screen Layout
No. Item
Description
1
2
3
4
5
6
7
8
9
Record mode
Indicates the current mode.
Indicates flash settings.
Flash
Self-timer/Burst
Zoom indicator
Shots remaining
Battery
Indicates Drive mode settings.
Displays zoom.
Indicates the remaining shots available.
Indicates battery level.
Storage media
Date stamp
AEB
Indicates current storage media in use.
Indicates date stamp is enabled.
Indicates AEB function is enabled.
Indicates stabilizer function is enabled.
Displays saturation settings.
Displays contrast settings.
Graphic display of Brightness.
Displays ISO settings.
10 Stabilizer
11 Saturation
12 Contrast
13 Histogram
14 ISO
15 Focus area
16 Shutter speed
17 Aperture value
18 Shake warning
19 Focus
Indicates focus area.
Displays shutter speed settings.
Displays aperture settings.
Indicates that the camera is shaking.
Indicates focus is enabled.
Using the LCD monitor
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
19
No. Item
Description
20 Exposure
21 Face tracking
22 White balance
23 Metering
24 Sharpness
25 Quality
Displays exposure settings.
Indicates face tracking is enabled.
Displays white balance settings.
Displays metering settings.
Displays sharpness settings.
Displays quality settings.
Displays photo size settings.
Indicates AF lamp is enabled.
26 Photo size
27 AF lamp
. Movie Mode Screen Layout
Standby layout
Recording layout
No. Item
Description
Indicates the current mode.
1
2
3
4
5
6
7
8
9
Record mode
Zoom indicator
Time remaining
Battery
Displays zoom.
Indicates the remaining time of video available.
Indicates battery level.
Storage media
Focus area
Focus
Indicates current storage media in use.
Indicates focus area.
Indicates focus is enabled.
Displays white balance settings.
Displays metering settings.
Displays movie size settings.
White balance
Metering
10 Movie size
Displays the commands on 4-way Navigation Control
button.
11 Key indicator
Using the LCD monitor
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
20
No. Item
Description
12 Recorded time
13 Recording status
14 Pre-record
Displays recorded time.
Indicates recording status.
Indicates pre-record is enable.
NOTE
• The Pre-Record icon appears on the screen in red color as the same position as
zoom indicator.
. Playback Mode Screen Layout
The Playback mode display varies depending on the type of image being viewed.
Playback mode display of still images:
No. Item
Description
1
2
Playback mode
Indicates Playback mode.
Indicates file is protected.
Protect
Indicates the button to press on the camera to play a
video file.
3
4
Button intro
Indicates the file number over the total number of
files in the storage card.
File no./Total no.
5
6
Battery
Indicates battery level.
Storage media
Indicates used storage memory.
Recording
information
7
Displays recording information of the file.
8
9
DPOF
Indicates the file is marked for printing.
Displays the image size settings.
Image size
Using the LCD monitor
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
21
Playback mode of videos:
No. Item
Description
1
2
3
Playback mode
Protect
Indicates Playback mode.
Indicates file is protected.
Indicates the file is a video.
Video clip
Indicates the button to press on the camera to play a
video file.
4
5
Button intro
Indicates the file number over the total number of
files in the storage card.
File no./Total no.
6
7
Battery
Indicates battery level.
Storage media
Indicates used storage memory.
Recording date &
time
8
9
Displays the date and time of the video clip.
Video size
Indicates the size of the video clip.
Indicates the volume while playing.
Display the total length of the video clip.
Indicates the played time of the video.
Displays playing status.
10 Volume
11 Video length
12 Played time
13 Playing status
14 Capture image
Capture the screenshot and save.
Using the LCD monitor
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
22
Changing the LCD Monitor Display
The type of information displayed on the LCD monitor can be changed using the 2
key. Press the 2 key repeatedly to change the LCD display from one type to another.
In Photo/Movie mode, the LCD display can be changed into any of the following.
• Basic
• Full
• None
• Guideline
• Help screen
NOTE
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD off
or Guideline is on: AEB, Face tracking, AF lamp, Drive mode, Stabilizer, and
Focus.
• Use Guideline is to help you compose your photo or video.
In Playback mode, the LCD display can be changed into any of the following.
• Basic
• Full
• None
• Help screen
NOTE
• LCD display cannot be changed in the following situations.
– Adjusting Aperture value/Shutter speed under Manual exposure mode
– Adjusting Aperture value under Aperture Priority mode
– Adjusting Shutter speed under Shutter Priority mode
– Recording video clips
– Playing video clips
– Playing slide show
Using the LCD monitor
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
23
Recording Images and Videos
Taking Images
Now that you are familiar with your camera, you are now ready to take your images.
Taking images with your camera is very simple.
1. Turn on the camera by pressing the POWER
button.
2. Slide the Mode switch to Photo mode [r].
3. Frame the shot using the focus bracket on the
LCD monitor. See illustration on the right.
4. Press the Shutter button down halfway
automatically focuses and adjusts the exposure,
and press the Shutter button down fully captures
the images.
If the shake warning icon
appears, hold the
camera steady with your arms at your side or use a
tripod to stabilize the camera to prevent blurred images.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
24
Setting the Zoom Control
Using a combination of 4 times optical zoom and 5 times digital zoom permits zoom
photography at up to 20 times magnification. While the digital zoom can be a useful
feature, the more an image is enlarged (zoomed), the more pixelated (grainier) the
setup digital zoom.
To adjusts the optical zoom:
1. Press the Zoom button to zoom in or zoom out an image.
2. The zoom indicator appears on the LCD monitor.
. Zoom button
1. Press the button right (T) to zoom in.
2. Press the button left (W) to zoom out.
To adjusts the digital zoom:
2. Press the Zoom button right/left optically zooms in/out to the maximum until
it stops.
3. Release the Zoom button.
Optical zoom 1x to 4x
Digital zoom 1x to 5x
NOTE
• Digital zoom is not activated in recording videos.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
25
Using Flash
When taking pictures in difficult lighting conditions, use the Flash/Right button to get
correct exposure. This function cannot be activated in recording videos or continuous
shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired Flash mode is
displayed on the LCD monitor.
Flash/Right
button
Your camera is equipped with five flash modes.
AUTO. The flash fires automatically whenever
extra lighting is needed.
Auto flash is enabled.
Red-eye reduction. The flash fires twice to reduce
the red-eye effect.
Forced on. The flash fires whenever you press the
Shutter button regardless of lighting conditions.
Slow sync. The flash fires with a slow shutter
speed.
Forced off. The flash is turned off.
NOTE
• Flash function is only available in shooting still images but not available in Burst
and AEB modes.
• Do not charge the flash while pressing the Zoom button. Charge the flash after
releasing the Zoom button if necessary.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
26
Setting the Focus Mode
This function allows users to define the type focus when recording a still image or a
video clip.
To set the Focus mode
• Press the Macro/Left button repeatedly until the
desired Focus mode icon is displayed on the
lower left corner of the LCD monitor.
Macro/Left
button
Your camera supports the four focus modes.
Normal. With normal focus, the focus range starts from
0.10 m (3.9'). When the camera is set to Normal mode,
there is no icon displayed on the screen.
Super Macro. This mode is designed for close-up
photography. The focus would be fixed and cannot
be adjusted.
Focus enabled
Pan Focus. The focus of this mode provides
maximum Depth of Field (DOF), not designed for
close-up photography.
Infinity. When Infinity is set, the camera focuses on
distant objects.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
27
Using the Function Menu
The Function Menu is used to adjust capture settings in Photo mode. It contains My
Mode, Photo Size, Quality, EV Compensation, White Balance, ISO, Metering, and
Color Mode.
Press the FUNC/Delete button of your camera to launch the Function Menu.
Press the FUNC/Delete button again to close the menu.
• The Menu bar displays the current status of your
camera settings. Only the available functions for the
settings are shown as icon on the menu bar.
• The available options for each item on the menu bar
are shown in the Menu options.
Menu options
• Use the 4 or 6 keys to move through the menu
selections then press the OK button to save and apply
changes.
Menu bar
My Mode
1. The My mode function displays the 4 most recent
modes used in order. When you move through the
different modes in the menu options, the items on
the menu bar changes synchronously to the corresponding available
settings.
2. Auto mode is always the first of the Menu options.
Photo Size
The Photo size function is used to set the resolution
before you capture the image. Changing the Photo Size
affects the number of images that can be stored in your
memory card. The higher the resolution, the more memory space is required.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
28
The table below shows the Photo Size values for still images.
Printing Size
Suggestion
Printing Size
Suggestion
Icon Pixel Size
Icon Pixel Size
x
x
x
2048 1536 4" 6"
4320 3240 A2 Size
Standard print
paper
x
x
4320 2880
1920 1080 HDTV
x
x
3264 2448 A3 Size
640 480
E-mail
x
2592 1944 A4 Size
Quality
The Quality sets the quality (compression) at which the
image is captured. The quality determines the amount of
compression applied to your images. Fine quality would
give you the best images with sharper details and less compression. However, the
higher the quality, the more memory space is required in your memory card.
EV Compensation
Images can be captured with the overall scene
intentionally made brighter or darker. These settings are
used when a suitable brightness (exposure) cannot
otherwise be obtained in circumstances where the
difference in brightness between the subject and the
background (the contrast) is large, or when the subject
that you wish to capture is very small within the scene.
Available for still images only.
• To adjust EV settings, press the 4 or 6 keys to increase/decrease the value. As
you adjust the settings, the LCD monitor synchronously displays the image
applying the EV settings. Press the OK button to save and apply changes.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
29
White Balance
This sets the white balance for a variety of lighting
conditions and permits images to be captured that
approach the conditions that are seen by the human eye.
• As you move through the selection, you can see the
preview on the LCD monitor synchronously.
Icon Item
Auto White Balance
Description
The camera automatically adjusts the white
balance.
Daylight
Ideally used for bright sunny conditions.
Ideally used for cloudy conditions.
Cloudy
Ideally used for indoor images with tungsten or
halogen lighting without a flash.
Tungsten
Ideally used for indoor images with bluish
fluorescent lighting conditions.
Fluorescent 1
Fluorescent 2
Ideally used for indoor images with reddish
fluorescent lighting conditions.
Used when light source cannot be specified.
Press the Shutter button for the camera to
automatically adjust the appropriate white balance
setting according to the environment.
Custom
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
30
ISO
This sets the sensitivity for capturing images. When the
sensitivity is raised (and the ISO figure is increased),
photography will become possible even in dark locations,
but the more pixelated (grainier) the image will appear.
• Use a higher ISO setting in dim conditions and a lower ISO setting in brighter
conditions.
NOTE
• If the Stabilizer is enabled, ISO is automatically set to Auto and cannot be adjusted.
To adjust ISO disable Stabilizer first.
Metering
This sets the metering method for calculating the
exposure.
Icon Item
Description
The entire area of the screen is measured, and the
exposure is calculated.
Multi
Averages the light metered from the entire frame, but
gives greater weight to the subject matter at the
center.
Center
A very small portion of the center of the screen is
measured, and the exposure is calculated.
Spot
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
31
Color Mode
The Color mode function applies different colors or tones
for a more artistic effect on the still images or videos.
• As you move through the selection, the preview on the
LCD monitor changes synchronously.
Icon Item
Normal
Description
The camera records normally.
The camera captures the image with more contrast
and saturation emphasizing on the bold colors.
Vivid
Sepia
B&W
Images are captured in sepia tones.
Images are captured in black and white.
Captured image becomes reddish. Ideally used to
record images like flowers and cars to make them
more vivid.
Vivid Red
Vivid Green
Vivid Blue
Captured image becomes greenish. Ideally used to
record images like mountains and lawns to make them
more vivid.
Captured image becomes bluish. Ideally used to
record images like the sky and the ocean to make
them look more vivid.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
32
Using the Record Menu
If you are in Photo mode, you can access the Record menu simply by pressing the
Menu button on your camera.
When the menu is displayed, use the 4-way navigation control and the OK button to
move through menu selections and apply your desired settings. To close the menu
anytime, press the Menu button again.
Record Menu
The Record menu allows you to change modes, and
setup other capture settings.
To go to Record Menu:
Set the Mode switch to Photo mode [r].
1. Press the Menu button to launch the Record
Menu.
2. Use the 8 or 2 keys to move through the menu
3. To select an item, press the 6 key or OK button.
4. Change the submenu settings using the 4-way navigation control.
5. Press the OK button to save and apply settings.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
33
Setting the Scene Mode
By simply selecting one of the following 5 modes, you can capture the image with the
most appropriate settings.
1. From the Record Menu, press to select Scene Mode.
2. Use the navigation controls to move through the selection.
3. Press the OK button to save and activate the selected Scene mode.
The table below shows the available Scene mode settings.
Icon
Item
Description
The simplest way to shoot basic images. Settings are
adjusted automatically.
Auto
The camera automatically adjusts suitable shooting
settings like shutter speed and aperture values.
Program
This feature lets users to adjust the aperture value
Aperture Priority and the camera automatically selects the shutter
speed to match the brightness.
This feature lets users to adjust the shutter speed
Shutter Priority
and the camera automatically selects the aperture
value to match the brightness.
This feature lets users to adjust the shutter speed
and aperture value to correctly expose your images.
Manual Exposure
After selecting the Scene mode, the selected mode will be added to the forefront in
My mode of Function Menu. In the Menu Options, the Auto mode is fixed and the
other 4 items can display the most recent used modes. See “Using the Function
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
34
Using Aperture Priority Mode
In this mode the user selects the aperture value and the camera selects the proper
shutter speed. The aperture value affects Depth of Field (DOF).
• Choose larger aperture, only one subject in focus but the background nice and
blurred (Shallow DOF).
• Choose smaller aperture, an image with everything in focus (Great DOF).
To set Aperture values
1. Select Aperture Priority mode from the Scene
mode submenu.
Displays the aperture
value
2. Press the OK button to enter the adjust mode.
3. Use the 8 or 2 keys to select the aperture value
options.
4. Press the Shutter button to capture the image.
Using Shutter Priority Mode
This mode is designed for capturing moving subjects. A faster shutter speed is
required to freeze motion (flying birds), while the slower shutter speed creates a
sense of motion (water flowing).
To set Shutter values
1. Select Shutter Priority mode from the Scene mode
submenu.
Displays the shutter
value
2. Press the OK button to enter the adjust mode.
3. Use the 4 or 6 keys to select the shutter value
options.
4. Press the Shutter button to capture the image.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
35
Using Manual Exposure
When the camera is in the Manual exposure mode, you can change either aperture or
shutter speed, or both.
To activate Manual Exposure
1. Select from the Scene mode submenu.
2. Press the OK button to enter the adjust mode.
Displays the aperture
and shutter speed
value
3. Use the 4 or 6 keys to select the shutter speed.
4. Or, use the 8 or 2 keys to select the aperture
value.
5. Use the OK button to switch between aperture and shutter speed adjustment
and vice versa.
6. Press the Shutter button to capture the image.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
36
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be set in the Drive mode
function in the Record menu. The Self-timer allows you to take images after a pre-
defined delay. While burst lets you take consecutive shots. This function is only
available in recording still images. The Drive mode setting is automatically set to off
when you turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Drive mode settings.
Icon Item
Description
Off
Captures an image without time delay.
Sets a 10-second delay to capture image after pressing
the Shutter button.
10 Sec.
Sets a 2-second delay to capture image after pressing
the Shutter button.
2 Sec.
Double
Burst
Performs delay and capture twice.
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the
image again.
Performs continuous shooting when the Shutter button
is pressed.
Stops shooting when the Shutter button is released.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
37
Setting the AEB
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in
the order of standard exposure, under exposure and overexposure compensation.
To set AEB
1. From the Record menu, select AEB.
2. Use the 2 or 8 keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the area on which the
camera focuses.
To set AF Area
1. From the Record menu, select AF Area.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available AF area settings.
Icon Item
Description
The camera automatically selects focus area within the
wide frame.
Wide
Center
The focus area is fixed on the center.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
38
Setting the AF Lamp
The AF Lamp function allows you to record images even in low light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of the camera, see “Front
camera to focus easily.
To set AF Lamp
1. From the Record menu, select AF Lamp.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting Sharpness
This function allows you to enhance or soften finer details of your images.
To set Sharpness
1. From the Record menu, select Sharpness.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Sharpness settings.
Icon Item
Description
High
Sharpens the image.
Normal
Low
Normal sharpness.
Softens the image.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
39
Setting Saturation
The Saturation function lets you adjust the color saturation in your images. Use a
higher saturation setting for rich colors and a lower saturation setting for more natural
tones.
To set Saturation
1. From the Record menu, select Saturation.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Saturation settings.
Icon Item
Description
High
Enhance the saturation.
Normal
Normal saturation.
Low
Reduce the saturation.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
40
Setting Contrast
This function allows you to adjust the contrast of your images.
To set Contrast
1. From the Record menu, select Contrast.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Icon Item
Description
High
Enhance the contrast.
Normal
Normal contrast.
Low
Reduce the contrast.
Setting the Digital Zoom
This feature controls the Digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first. When the zoom scale
exceeds 5x, the camera uses digital zoom.
To set Digital Zoom
1. From the Record menu, select Digital Zoom.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
41
The table below shows the available Digital Zoom settings.
Icon Item
Description
Intelligent
Zoom
Enlarges the image digitally with almost no distortion.
This feature is available for still images only.
Standard
Zoom
Enlarges all image sizes up to a maximum of 5x in
preview, but the image quality deteriorates.
Off
Uses the optical zoom only.
NOTE
• Digital Zoom is not available in Face Tracking on and Movie modes.
• The maximum intellect zoom scale varies depending on the image type and
resolution.
Setting the Date Stamp
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured. Once date and time are stamped on an
image, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows.
• Available for still images only.
• May slow down AEB/Burst mode when Date Stamp is enabled in AEB/Burst mode.
• In vertical or rotated images, the date and time on your images still appear
horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
42
Setting Auto Review
The Auto Review function lets you view the captured image right after shooting it.
If Auto Review is On, the camera will display the captured image for 1 second on the
LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting Stabilizer
This function allows you to prevent blurred images caused by shaking.
1. Enable the Stabilizer under the Record Menu.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
43
Recording Videos
You can record videos with the camera, the available
recording time depends on the capacity of the memory
card. Videos can be recorded until the maximum memory
capacity has been reached. However, the length of a
single video may be limited.
1. Slide the Mode switch to Movie mode [ ].
2. Focus your camera on the subject that you want to take.
3. Press the Shutter button to start recording.
4. Use the Zoom button to zoom in and zoom out an image.
5. To pause recording, press the 8 key.
6. To continue recording, press the 8 key again.
7. To stop recording, press the Shutter button.
NOTE
• When the camera stop recording due to reaching maximum time (29 minutes) for a
single video, simply press the Shutter button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Digital zoom is not available while recording a video.
• Sound cannot be recorded while using zooms (Pressing the Zoom button).
• Power save is not available in video recording or pause recording.
Settings of Recording Videos
Press the FUNC/Delete button to enable video setting menu before recording a
video.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
44
Movie Size
The Movie size function appears only in Movie mode. Use
this function to adjust the resolution and quality of movie
clips.
The table below shows the available size and corresponding image quality settings.
Icon Item
Description
x
640 480
High Quality
x
320 240
Normal
Web
For Internet, see “Internet Mode” on page 45 below.
Internet Mode
The Internet mode allows you to record videos with predefined video settings for easy
upload to the Internet website.
The Internet supports two file upload standards.
• Single File Uploader: The maximum video file size is up to 100MB.
• Internet Uploader: The maximum video file size is up to 1GB.
Therefore when you record using the Web mode, the following standards are
followed.
x
• Recorded videos are set to Internet standard resolution of 640 480.
• Recording automatically stops when the file reaches 100MB.
• To record a Web video, select from the Movie size function. Available recording
time for a Web video is up to 10 minutes.
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
45
White Balance, Metering, Color Mode
To set above settings, please refer to “Using the Function Menu” on page 28.
Pre-Record
You can catch the first three seconds of action you would
have potentially missed. Once enabled, this function
starts recording video automatically before the Shutter
button is pressed. As soon as the Shutter button is hit, the most recent three seconds
of video is added to the beginning of the clip.
Display the icon in red while turning Pre-Record on.
NOTE
• Pre-Record will be canceled in the following situation.
– Switch to Photo mode or Playback mode
– Turn the unit off
– Enter USB mode
Recording Images and Videos
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
46
Playback
You can playback the still image and video clips on the LCD monitor.
Viewing in Single Navigation
The Single navigation mode displays the images one by one on the LCD monitor. To
view image/video clips, follow the steps below.
1. Slide the Mode switch to Playback mode p.
2. The LCD monitor displays an image. To understand the icons and other
Still Image
Video
3. Use the 4 or 6 keys to view next/previous image/video.
for more details.
Viewing Thumbnails
This function allows you to view 9-thumbnail images or by calendar mode on the LCD
monitor at the same time. Searching numerous images is much easier then single
view navigation.
To set 9-images mode
1. Set the camera to Playback mode p.
2. Press the Zoom button left once to enter 9-images mode.
3. Use the navigation controls to move through the items.
4. Press the OK button to select the image and view it normally.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
47
Scroll bar
If scroll bars appear, it indicates that the screen can be
scrolled.
Thumbnail view
To set calendar mode
1. Set the camera to Playback mode p.
2. Press the Zoom button left twice to view
thumbnails in calendar mode.
3. Use the navigation controls to move through the
items.
4. Press the OK button to select an image and view it normally.
NOTE
• In calendar mode:
– The first file (including image, video, and error file) recorded on each date
appears on the screen.
– Press the Zoom button right would back to 9-images mode.
Thumbnail icon:
When you view the thumbnails, some images may contain icon. The icon indicates
the type of file or recording.
Icon Type
File Error
Description
Indicates an error file.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
48
Zooming Images
The zoom view function works with still images only.
• In normal view, press the Zoom button right repeatedly
until the desired zoom view.
• The 4 arrows on the LCD monitor indicate that the
image is zoomed in.
• You can zoom to view an image of up to 12x.
• Use the navigation controls to view the zoomed image.
• Press the Menu button to close zoom view.
NOTE
x
• For 320 240 resolution images, you can only zoom in up to 6x.
Playing Videos
1. Set the camera to Playback mode p.
2. Use the navigation controls to scroll through the
saved images. A video clip has a video icon
displayed on screen.
3. Press the OK button to play the video.
4. During playback, press and hold the 4 or 6 keys to fast forward or rewind
the video. The camera supports forward and rewind speed of up to 4x.
5. During playback, use the Zoom button to control volume. Press right to
increase volume or press left to decrease volume.
6. Press the 8 key to pause playback. Press the 8 key again to resume.
When paused, the play info will remain on screen except
.
7. To forward or rewind the video frame by frame, press the 8 key to pause
playback, then press the 4 or 6 keys.
8. Press the 2 key to stop the playback. The LCD monitor displays the video
frame image in Single navigation mode.
NOTE
• The play info, except the icon
, will be displayed when the video is paused,
during REW/FF or frame by frame modes.
• Volume cannot be adjusted when paused or during REW/FF modes.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
49
To capture a screenshot image from a video clip
1. During playback of video, press the 8 key to
pause playback on your desired video frame to
capture.
2. Press the Shutter button to capture a screenshot.
3. The camera stops playback. The LCD monitor
displays the captured image in Single navigation mode.
NOTE
• This feature does not function when pressing shutter button and memory full or the
folder cannot be created message is displayed. The icon
the screen either.
does not appear on
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
50
Deleting an Image/Video
There are two ways to delete an image/video.
• Using the FUNC/Delete button.
Using the FUNC/Delete Button
Use the FUNC/Delete button on your camera to delete an image/video clip.
1. Set the camera to Playback mode p.
2. View image/video clips in Single navigation mode.
3. Use the 4 or 6 keys to scroll the display.
4. When the desired image/video clip is displayed on the LCD monitor, press
the FUNC/Delete button.
5. A confirmation selection appears on screen.
6. Select Delete.
7. Press the OK button to delete.
8. The next image is displayed on the LCD monitor. To delete another file, use
the 4 or 6 keys to scroll through the image/video clips. Then, repeat steps 6
to 7.
9. To close the Delete function and go back to the Single navigation mode,
select Cancel.
NOTE
• Locked files cannot be deleted at any time. When you try to delete a locked file, the
camera displays “File Locked” message on the LCD monitor.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
51
Playback Menu
The Playback menu allows you to edit images and setup playback settings.
To go to Playback Menu:
1. Slide the Mode switch to Playback mode p.
Playback Menu
2. Press the Menu button to launch the Playback
menu.
3. Use the 8 or 2 keys to move through the menu
selections.
4. To select a menu, press 6 or the OK button.
5. Change the submenu settings using the 4-way navigation control.
6. Press the OK button to save and apply settings.
Delete
The Delete function allows you to remove unwanted files in the internal memory or on
the memory card. Protected files cannot be erased, to delete, unprotect the file first.
To delete an image/video clip:
1. From the Playback menu, select Delete.
2. The Delete submenu is displayed on the LCD monitor. Select an available
setting.
• Single: Select one file to delete.
• Multi: Select multiple files to delete at the same time.
• All: Delete all files.
To delete a single file:
1. Select Single in the Delete submenu, the images are displayed on the LCD
monitor in Single navigation mode.
2. Use the 4 or 6 keys to scroll the display.
3. When the desired image/video clip is displayed on the LCD
monitor, select Delete.
4. Press the OK button to delete.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
52
5. The next image is displayed on the LCD monitor. To delete another file, use
the 4 or 6 keys to scroll through the image/video clips. Repeat steps 3 to 4.
6. To close the Delete function and go back Playback menu, select Cancel.
To delete multiple files:
1. Select Multi in the Delete submenu, the images
are displayed in thumbnail view on the LCD
monitor.
2. Use the navigation control to move through the
files.
3. When the desired image/video clip is highlighted, press the OK button to
mark image/video clip for deletion.
4. Repeat step 3 until all desired images for deletion are marked.
5. Press the Menu button. A confirmation selection appears.
6. Select Yes to confirm.
7. Press the OK button to delete marked files.
To delete all files:
1. Select All in the Delete submenu. A confirmation message appears.
2. Select Yes.
3. Press the OK button to delete all files.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
53
Slide Show
The slide show function enables you to playback your still images automatically in
order one image at a time.
To view slide show:
1. From the Playback menu, select Slide Show. The slide show menu
appears.
2. Set the slide show settings.
3. Select Start, then press the OK button to start the slide show.
4. During slideshow, press the OK button to pause slide show.
5. Use the 8 or 2 keys to move through the options. Select whether to
Continue or Exit the slide show.
6. Press the OK button to apply selected option.
To change slide show settings:
1. From the Slide show menu, use the 8 or 2 keys to move through the
selections.
2. Select Interval setting. Press the 4 or 6 keys to adjust. Choose among the
available interval settings: 1 sec., 3 sec., 5 sec., and 10 sec.
3. Select Transition setting. Press the 4 or 6 keys to adjust. Choose among
the available transition settings.
4. Select Repeat setting. Press the 4 or 6 keys to adjust. Available settings
are: Yes, No.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
54
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
when viewed on Playback mode.
To protect files:
1. From the Playback menu, select Protect.
2. The Protect submenu is displayed on the LCD monitor.
Select an available setting.
• Single: Select one file to lock/unlock.
• Multi: Select multiple files from the thumbnail view to lock/unlock.
• Lock all: Lock all files.
• Unlock all: Unlock all files.
To protect/unprotect a single file:
1. Select Single in the Protect submenu, the images are displayed on the LCD
monitor in Single navigation mode.
2. Use the 4 or 6 keys to scroll the display.
3. When the desired file is displayed on the LCD monitor, press the OK button
to select Lock/Unlock.
4. To close the protect/unprotect function and go back Playback menu, select
Exit.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
55
To protect/unprotect multiple files:
1. Select Multi in the Protect submenu, the images are displayed in thumbnail
view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired file is highlighted, press the OK button to mark/unmark the
file clip for protection.
4. Repeat step 3 until all desired files to protect are marked.
5. Press the Menu button. A confirmation selection appears.
6. Select Yes.
7. Press the OK button to lock files and go back to Playback
mode.
To protect all files:
1. Select Lock all in the Protect submenu. A confirmation message appears.
2. Select Yes.
3. Press the OK button to lock all files.
To unlock all files:
1. Select Unlock all in the Protect submenu. A confirmation message appears.
2. Select Yes.
3. Press the OK button to unlock all protected files.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
56
Color Mode
The Color mode function lets you edit still images to apply different colors or tones for
a more artistic effect. Edited images in this function are saved as a new file.
To activate Color Mode:
1. Set the camera to Playback mode p.
2. Press the 4 or 6 keys to scroll and select an
image to edit.
3. Press the Menu button to launch the Playback
menu.
4. Select Color Mode. The Color mode submenu appears.
5. Press the 4 or 6 keys to scroll and select an option. As you move through
the selection, the preview on the LCD monitor changes synchronously.
The succeeding table shows the available settings.
Icon Item
Description
Normal
No effect is added to the image.
Sepia
Image is saved with a sepia tone.
Image is saved in black and white.
Image becomes a negative of the original image.
Image is saved with mosaic tiles.
Image is saved with reddish tint.
Image is saved with greenish tint.
Image is saved with bluish tint.
B&W
Negative
Mosaic
Vivid Red
Vivid Green
Vivid Blue
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
57
Trim
The Trim function allows you to trim an image to another image size. This function is
only available for still images.
To trim an image:
1. Set the camera to Playback mode p.
2. Use the 4 or 6 keys to scroll and select an image to trim.
3. Press the Menu button to launch the Playback menu.
4. Select Trim. The Trim screen layout is displayed on the LCD monitor.
5. Use the Zoom button to change size as zoom in/out.
No. Description
1
2
3
Enlarged image
4-way indicator
Trimmed size
The approximate location of the trimmed
area
4
5
Image area
6. Use the navigation controls to move the image.
7. Press the OK button to apply changes. A menu selection appears.
8. Select an available setting.
• Overwrite: Save and replace the old file with the new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel Trim.
9. Press the OK button to save/cancel changes.
NOTE
• Trim function is not available for images with image size set to VGA.
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
58
Resize
Resizes a previously saved image and only resizing to a smaller size is available.
To resize an image:
1. Set the camera to Playback mode p.
2. Use the 4 or 6 keys to scroll and select an image to resize.
3. Press the Menu button to launch the Playback menu.
4. Select Resize. The Resize submenu is displayed on the LCD monitor.
5. Select size among: 8M, 5M, 3M, and VGA. Available size settings may vary
depending on original image size. Unavailable settings appear as gray icons
in Resize submenu.
6. After selecting size, a menu selection appears. Select an available setting.
• Overwrite: Save and replace old file with a new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel resize.
7. Press the OK button to save/cancel changes.
NOTE
• Resize function is not available for images with image size set to VGA.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
59
Startup Image
You can specify the startup image from the captured images for camera.
1. Press the Menu button to launch the Playback menu.
2. Select Startup Image. The menu selection appears.
3. Select an available setting.
• System: Use camera default image.
• My Photo: Use the 4 or 6 keys to scroll and select desired image.
• Off: Disable the startup image.
4. Press the OK button to apply changes.
NOTE
• The startup image will still be displayed at startup even if the selected image was
deleted.
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed
printing information on your memory card. You can select the images to be printed
and how many prints to make with the DPOF menu in the camera and insert the
memory card to the card compatible printer. When the printer starts printing, it will
read the embedded information on the memory card and print the specified images.
To set DPOF:
1. Press the Menu button to launch the Playback menu.
2. Select DPOF. The submenu appears. Available settings are as follows.
• Single: Select a single image to mark.
• All: Mark all images in the memory card.
• Reset: Reset all DPOF settings to initial default settings.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
60
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the 4 or 6 keys to scroll and select an image to mark
for printing.
3. Specify the number of copies. Use the 2 or 8
keys to increase/decrease number.
4. Press the FUNC/Delete button to toggle between
turning on/off the date stamp.
5. Press the OK button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation message appears.
2. Select Yes.
3. Press the OK button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set Radial blur for an image:
1. Press the Menu button to launch the Playback menu.
2. Select Radial Blur. The menu selection appears.
3. Use the 2 or 8 keys to specify the level of blurs. The
adjusting result on preview synchronously while selecting
the level.
4. Press the OK button to proceed save options.
5. Available settings are as follows.
• Overwrite: Save and replace the old file with a new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel Radial blur.
Playback
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
61
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows you to configure general camera settings.
To go to Setup menu:
1. Press the Menu button to launch the Record/
Playback menu.
2. Use the 4 or 6 keys to switch the menu tab to
Setup menu.
3. Use the 2 or 8 keys to move through the menu selections.
4. To select an item, press the OK button or 6 key.
5. Change the submenu settings using the 4-way navigation control.
6. Press the OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the OK button to apply changes.
Item
Available Settings Description
Sound 1, Sound 2, Selects the startup sound when camera is
Startup
Sound 3, Off
turned on.
Enables or disables shutter sound when the
Shutter button is pressed. Shutter sound is
not available when recording videos.
Shutter
On, Off
Beep volume 0-4
Adjusts volume.
Using the Setup Menu
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
62
Setting Power Save
The Power Save function allows you to set an idle time after which the camera
automatically sets to sleep mode to save power. After a minute of being in sleep
mode, the camera eventually turns off power.
This function is not available in the following instances:
• Recording a video file
• Playing a slide show/video file
• Using the USB connector
Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD brightness to
conserve battery power. When the camera is idle for 20 seconds, the LCD darkens.
Press any button to resume to normal brightness.
• The camera is idle when no buttons are pressed. LCD Save, though enabled, does
not function during video playback, slide show and video recording.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is
useful in attaching date stamps on captured images. Your camera uses a 24-hour
time format.
1. Press the navigation controls to adjust date and time value. By holding down
the 2 or 8 keys, the numeric values changes continuously.
2. Press the OK button to apply changes.
Setting Lingua
Specify in which language menus and messages are to be displayed on the LCD
monitor.
1. Use the navigation control to scroll through the list and select the desired
language.
2. Press the OK button to confirm and apply settings.
Using the Setup Menu
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
63
Setting File Numbering
This function allows you to select a method to assign file numbers to images.
Available settings are:
• Series: Assigns numbers to files in sequence even if the folder is changed.
• Reset: The file numbering will start from 0001 each time a folder is changed or the
memory is formatted.
To understand folder and file structure of your camera, see “About Folder and File
Setting TV Out
Use the TV Out function to adjust video output signal to accommodate different
regional settings. If TV out is not set correctly, the image may not display properly on
TV.
Available settings are:
• NTSC: Applicable in USA, Canada, and others.
• PAL: Applicable in Europe, Asia (excluding Taiwan), Oceania and others.
Setting Memory Kit
This utility formats the internal memory (or memory card) and erases all stored
images and data.
Available settings are:
• Format: Select to format currently used memory.
• Copy to Card: Select to copy all files stored in the internal memory to the memory
card.
NOTE
• If images were saved to internal memory before inserting a memory card into the
camera, you can use Copy to Card function to copy all images from the internal
memory to the memory card.
• If a memory card has not been inserted into the camera or the memory card is
locked or the internal memory is empty, Copy to Card function is not available.
Using the Setup Menu
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
64
Making Connections
You can connect your camera to: TV or computer.
Connecting the Camera to a TV
You can play back your images on a TV screen. Before connecting to any video
devices, make sure to select NTSC/PAL to match the broadcast standard of the video
equipment you are going to connect to the camera.
• As an AV cable, use the separately sold EMC-4A.
To connect your camera to a TV:
1. Turn on the camera.
2. Set the TV out to match the TV’s
video out format. See “Setting TV
3. Connect the AV cable to the USB port
on the bottom of your camera.
4. Connect the other end of the cable to
the TV’s AV input port.
5. The LCD monitor turns black and all
Optional AV cable (EMC-4A)
images and video clips are displayed
on the TV.
Making Connections
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
66
Connecting the Camera to a Computer
You can transfer images and videos to your computer.
1. Connect one end of the USB cable to
an available USB port on your
computer.
USB cable
(included with camera)
2. Connect the other end of the USB
cable to the USB port on the bottom
of your camera.
3. Turn on the camera.
4. The USB mode menu appears on the screen. Select
Computer by using the 8 or 2 keys and press the OK
button.
5. The computer starts to detect the connection while the LCD monitor appears
“Connecting...”.
6. Connection established after PC Mode appeared on the LCD monitor.
7. Access the files in the camera by your computer.
NOTE
• The camera’s internal memory and memory card would display as removable
drives in computer.
• After the connection, no image is displayed on the LCD monitor.
Making Connections
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
67
. Saving the Files to Your Computer
• Windows
1. Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
2. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
3. Right-click the “DCIM” folder.
4. On the shortcut menu that appears, click “Copy”.
5. Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you
want to keep the existing “DCIM” folder, you need to change its name or move
it to a different location before performing the next step.
6. Windows 7 users: On the “Documents” “Organize” menu, select “Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select “Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 7, Windows Vista) or “My Documents” (Windows XP)
folder. You now have a copy of the files that are in camera memory on your
computer.
7. After you finish copying images, disconnect the camera from the computer.
On the camera, press the POWER button to turn off the camera. Then,
disconnect the camera from the computer.
Making Connections
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
68
• Macintosh
1. Double-click the camera’s drive icon.
2. Drag the “DCIM” folder to the folder to which you want to copy it.
3. After the copy operation is complete, drag the drive icon to Trash.
4. On the camera, press the POWER button to turn off the camera. Then,
disconnect the camera from the computer.
. To view images you copied to your computer
• Windows
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• Macintosh
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
Making Connections
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
69
4. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Viewing User Documentation (PDF Files)
1. Start up your computer, and place the bundled CD-ROM into its CD-ROM
drive.
Normally, this should cause the menu screen to appear automatically. If your
computer does not display the menu screen automatically, navigate to the CD-
ROM on your computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Lingua” down arrow button and then
select the language you want.
3. Click “Manual” to select it and then click “Fotocamera digitale”.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader installed on your
computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the
bundled CD-ROM.
Making Connections
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
70
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the cameras viewfinder.
Doing so can damage your eyesight.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
71
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
72
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
. Rechargeable Battery
• Use only the USB-AC adaptor (AD-C53U) or the specified device to charge the
battery. Attempting to charge the battery by an unauthorized means creates the
risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
• The battery is intended for use with a CASIO Fotocamera digitale only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
73
• Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera and keep it away from open flame.
• Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
• If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• Be sure to read the user documentation that comes with the camera and special
USB-AC adaptor before using or charging the battery.
• If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
• Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
. Battery Life
• Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
• Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
• The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
74
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is lighting green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Using a battery that is low
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
75
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. USB-AC adaptor Handling Precautions
-
0 Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0 Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0 Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0 Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0 Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0 Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or a CASIO
authorized service center to request repair. Continued use of a damaged power
cord creates the risk of fire, malfunction, and electric shock.
• The USB-AC adaptor becomes slightly warm during charging. This is normal and
does not indicate malfunction.
• Unplug the power cord from the power outlet when you are not using the USB-AC
adaptor.
• Never use detergent to clean the power cord (especially the plug).
• Never cover the USB-AC adaptor with a blanket, etc. Doing so creates the risk of
fire.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
76
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
. Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not use within the text of this
manual.
• SDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Windows Vista, Windows 7, and DirectX are registered
trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
• Adobe and Reader are trademarks or registered trademarks in the United States
and other countries of Adobe Systems Incorporated.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
77
Charging Precautions
. If the camera’s back lamp starts flashing green at high speed...
• Ambient temperature or the temperature of the battery may be either too high or
too low. Disconnect the USB cable and wait until temperature is within the
allowable charging range before trying again.
• Battery contacts may be dirty. Wipe them with a dry cloth.
• Try connecting to a different computer USB port. Depending on the setup of your
computer, you may not be able to charge the camera’s battery over a USB
connection.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
78
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power cord plug depends on each country or geographic area. Before taking the
camera and USB-AC adaptor along on a trip, check with travel agent about the
power supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-80) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Memory Card Precautions
. Using a Memory Card
Write enabled
Write disabled
• SD memory cards, SDHC memory cards, and SDXC
memory cards have a write protect switch. Use the
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an
SD memory card you must then turn write protection
off whenever you want to record to it, format it, or
delete any of its images.
• If a memory card starts to behave abnormally during image playback, you can
that you always take along multiple memory cards whenever using the camera far
away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
79
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
before discarding or transferring ownership of the camera.
About Folder and File Names
Your camera automatically creates specific directory of folders in the internal memory
cards to organize captured images and videos.
File Naming
File names begin with “CIMG” and followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the
camera will display the warning message “Folder cannot be created”. When this
happens, try one of the following ways:
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
80
. Memory Folder Structure
DCIM Folder
Recording Folder
Image File
DCIM
101CASIO
CIMG0001.JPG
CIMG0002.AVI
Movie File
Recording Folder
Recording Folder
102CASIO
103CASIO
DPOF File Folder
DPOF File
MISC
AUTPRINT.MRK
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM copies of
the DCIM folders it to change its name to a date or something similar after you copy
it to your computer. If you later decided to return the folder to the camera, however,
be sure to change its name back to DCIM. The camera is designed to recognize
only a root file with the name DCIM. Note the camera also will not be able to
recognize the folders inside the DCIM folder unless they have the names they
originally had when you copied them from the camera to your computer.
• You also can use a computer card adapter or a memory card reader/writer to
access camera files directly from the camera’s memory card.
• A Subject Image File (CIMG
Subject Image File on your computer and transfer it back to the camera. Doing so
can cause abnormal camera operation.
.JPE) contains special image data. Never edit a
****
NOTE
• Do not change the folder and file names in the memory card using your computer.
It may be unable to playback the data using the camera.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
81
Troubleshooting
Problem
Cause and/or Action
The battery may be exhausted. Charge or replace
the battery.
Camera does not turn on.
Camera turns off
automatically.
Press the POWER button to turn on the camera.
Press any button except the POWER button to turn
on the LCD.
LCD turns dark.
Empty battery icon is
displayed on the LCD, then Battery is exhausted, please replace or recharge.
the camera turns off.
LCD monitor displays
“No image”.
There is no image file in the memory card. Image
file format may not be supported.
LCD monitor displays
Function is only available for specific file types. File
“Not available for this file”. format is not supported.
LCD monitor displays
“Memory full”.
Memory card is full. Replace the memory card with
a new one or delete unnecessary images.
LCD monitor displays
“File locked”.
This file is locked. Unlock the file. See “Protect” on
page 55.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlock
position.
LCD monitor displays
“Card locked”.
LCD monitor displays
“Format error”.
The card may be damaged. You can either change
the card or wipe to clean the connected points.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlock
position.
The memory card is full. Replace card or delete
unnecessary files.
LCD monitor displays
“Copy error”.
No image displays on the
TV screen.
Incorrect TV-out type was selected. Set the correct
TV-out type to match your TV system.
Do not force the lens to go back.
The type of the battery used may be incorrect or the
battery power level is too low. Change the battery or
charge the battery before using the camera.
The lens is stuck.
The camera’s protection function may have
activated because camera temperature is too high.
Turn off the camera and wait until it cools down
before trying to use it again.
LCD monitor Displays
“Auto Shutdown”.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
82
Number of Snapshots/Movie Recording Time
Snapshot
Built-in Memory
(Approx. 10.9MB)
Snapshot
SD Memory Card
(1GB) Snapshot
Recording
Image Size
(Pixels)
Approximate
Image File Size
Image Quality
Recording Capacity
Capacity
14M
(4320 3240)
Superfine
Fine
5.18 MB
3.14 MB
2.16 MB
4.85 MB
2.79 MB
1.87 MB
3.13 MB
1.81 MB
1.22 MB
1.99 MB
1.16 MB
806 KB
1.26 MB
758 KB
625 KB
1.03 MB
662 KB
505 KB
199 KB
175 KB
141 KB
1
2
166
x
263
392
Normal
Superfine
Fine
3
3:2
1
187
x
(4320 2880)
2
296
Normal
Superfine
Fine
4
441
8M
2
289
x
(3264 2448)
4
454
Normal
Superfine
Fine
6
671
5M
4
450
x
(2592 1944)
7
710
Normal
Superfine
Fine
11
7
1041
710
3M
x
(2048 1536)
11
14
8
1098
1342
851
Normal
Superfine
Fine
16:9
(1920 1080)
x
13
17
44
51
60
1233
1590
4028
4647
5492
Normal
Superfine
Fine
VGA
(640 480)
x
Normal
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
83
Movies
Built-in Memory SD Memory Card
Image
Quality
(pixels)
Approximate
Data Rate
(Frame Rate)
File Size of
1-minute
Movie
Maximum
File Size
(Approx. 10.9MB)
Movie Recording
Capacity
(1GB) Movie
Recording
Capacity
STD
640 480
8Mbps
(30 Frame)
16 minutes
25 seconds
9 seconds
58.7MB
31.5MB
Maximum
MovieSize:
29 minutes
x
LP
320 240
4Mbps
(30 Frame)
30 minutes
4 seconds
18 seconds
x
Maximum
Movie Size:
10 minutes
Web
640 480
8Mbps
(30 Frame)
16 minutes
25 seconds
11 seconds
59MB
x
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• The above values are based on use of a PRO HIGH SPEED SD memory card
(Panasonic Corporation). The number of images you can save depends on the type of
memory card you are using.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 1GB.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
84
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.2); DPOF compliant
Movies:
Motion JPEG AVI, IMA-ADPCM audio (monaural)
Recording Media
Built-in Memory (Image Storage Area: 10.9MB)
SD/SDHC/SDXC
Recorded Image Sizes Snapshot:
14M (4320 3240), 3:2 (4320 2880), 8M (3264 2448),
x
x
x
x
x
x
5M (2592 1944), 3M (2048 1536), 16:9 (1920 1080),
x
VGA (640 480)
Movies:
x
x
x
STD (640 480), LP (320 240), Web (640 480)
Image Deletion
Effective Pixels
Imaging Element
Single, Multi, ALL
14.10 Megapixels
Size: 1/2.3-inch square pixel CCD
Total Pixels: 14.53 Megapixels
Lens/Focal Distance
F2.9 (W) – F6.5 (T) / f= 4.8 to 19.2 mm
(equivalent to 27 to 108 mm in 35 mm format)
Zoom
4x optical zoom, 5x digital zoom
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Normal, Super Macro, Pan Focus, Infinity
• AF Area: Wide/Center; with AF assist lamp
9
9
) (Wide Angle)
Approximate Focus
(Snapshot/movie)
(From Lens Surface)
Auto Focus: 10 cm to
(3.9" to
Super Macro Focus: 5 cm to 100 cm (2.0" to 3.3') (First step
zoom from the Widest Angle setting)
Metering
Multi-pattern, center weighted, and spot
Exposure Control
Auto, Program AE, Aperture Priority AE, Shutter Speed Priority
AE, Manual Exposure
Exposure
–2.0 EV to +2.0 EV (in 1/3EV steps)
Compensation
Shutter
CCD shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1 to 1/2000 second
Snapshot (Manual): 15 to 1/2000 second
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
85
Aperture Value
White Balance
F2.9 (W) to F9.9 (W) (When used with ND filter)
Auto, Daylight, Cloudy, Tungsten, Fluorescent 1, Fluorescent 2,
Custom
Sensitivity (Standard Snapshots:
Output Sensitivity)
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600
Movies: Auto
Self-timer
Approximate Trigger Times:
10 seconds, 2 seconds, 10 seconds
x
2
Flash Modes
Flash Range
Auto, Forced Off, Forced On, Red-eye Reduction, Slow Sync
Wide Angle: 0.3 m to 1.5 m (11.8" to 4.9')
(ISO Sensitivity: Auto) Telephoto: 0.6 m to 1 m (23.6" to 3.3')
Flash Charging Time Approximately 5 seconds maximum
Recording
Snapshots; Macro; Self-timer; Continuous Shutter (3 images);
Face Detection; Movies (normal movie) (with monaural audio)
Monitor Screen
Viewfinder
2.7-inch TFT color LCD
230,400 (960 240) dots
x
Monitor Screen
Timekeeping Function Built-in quartz digital clock
Date and Time: Recorded with image data
Auto Calendar: To 2059
External connection
terminal
USB port / AV output terminal (NTSC/PAL)
Microphone
Speaker
Monaural
Monaural
x
1
Power Requirements Rechargeable lithium ion battery (NP-80)
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
86
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (CIPA) (Operating Time)*1
Continuous Playback (Snapshots)*2
180 shots
4 hours
Approximate continuous movie recording time*3
1 hour 20 minutes
• Battery: NP-80 (Rated Capacity: 700 mAh)
• Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic
Corporation))
• Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
*3 Approximate time for a repeated cycle of 10 minutes recording followed by deletion of
the recorded file.
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on
greatly affects recording time and number of shots values.
Power Consumption 3.7 V DC, Approximately 3.5 W
x
x
Dimensions
98.8 (W) 53.0 (H) 20.7 (D) mm
x
x
(3.9" (W) 2.1" (H) 0.81" (D))
(20 mm (0.79") thick excluding projections)
Weight
Approximately 124g (4.4 oz) (including battery and memory card)
Approximately 103g (3.6 oz) (excluding battery and memory card)
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
87
. Rechargeable lithium ion battery (NP-80)
Rated Voltage
3.7 V
Rated Capacitance
700 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
x
x
Dimensions
31.4 (W) 39.5 (H) 5.9 (D) mm
x
x
(1.24" (W) 1.56" (H) 0.23" (D))
Weight
Approximately 19g (0.67 oz)
. USB-AC adaptor (AD-C53U)
100 to 240 V AC, 50/60 Hz, 100 mA
Input Power
5.0 V DC, 650 mA
Output Power
5 to 35°C (41 to 95°F)
Operating Temperature
Requirements
x
x
53 (W) 21 (H) 45 (D) mm
Dimensions
x
x
(2.1" (W) 0.83" (H) 1.8" (D)) (excluding projections)
Approximately 37g (1.3 oz)
Weight
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
Appendix
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
88
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1107-B
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
|