Self Help Guide
Upgrading the Firmware on your Belkin VoIP Router
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
(You will be presented with the following screen)
F1PI242ENau
TSG-ANZ-VHD-12
Page 1 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
Self Help Guide
You will now need to restore the unit to Factory Defaults
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
Step 4 Click Tools then Configuration Tools
(You will be presented with the following screen)
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next
Step 6 Click APPLY
(You will be presented with the following screen)
TSG-ANZ-VHD-12
Page 3 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
Self Help Guide
You will now need to re-enter your Username and Password Settings
Please do not use a saved configuration as it will not function correctly with
the updated firmware.
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Under ADSL Parameter Setting Enter your Username and
Password into the fields
(You will be presented with the following screen)
Step 4 Click Save Settings
TSG-ANZ-VHD-12
Page 4 of 4
If you still require further assistance
contact Belkin Technical Support
Call: 1300 554 780
Scarica from Www.Somanuals.com. All Manuals Search And Scarica.
|